RG552

COMO ATUALIZAR ANDROID

Atualizar o Android melhor a experiência e a performance do RG552, você só precisa de um cartão microSD extra para realizar o processo abaixo:

1. Torne-se apoiador no Patreon do Black Seraph ($10) e faça download da versão mais recente para RG552;
2. Use a MicroSD card imagining tool of choice to flash the update.img file onto a >= 4GB MicroSD card (Balena Etcher, Raspberry Pi Imager, Ubuntu’s built-in Disks utility, dd, etc.)
3. Power off your RG552, remove the cable from the port labeled “USB” (if you currently have one plugged in) & remove all MicroSD cards from it
4. Plug your RG552’s charger into the port labeled “DC” to ensure your device doesn’t run out of power mid-flash
5. Plug the MicroSD card you flashed previously into your RG552’s “TF1/INT” MicroSD card slot and power it on
6. You will see a “Installing system update” message on your RG552’s screen, go drink a beverage of choice, this will take a while
7. After 15 minutes or so you will see a message asking you to “please remove the sdcard……”, do so and your device should reboot (if not, long press the power button manually)
   7a. If you’re upgrading from a previous Black-Seraph Android 11 build: Press the power button to select “Reboot system now” which will reboot your RG552 without wiping your data
   7b. If you’re upgrading from Anbernic’s Android 11 build or if you’re coming from an older Android revision: Press the volume minus button 5 times to select “Wipe data/factory reset” and confirm your selection with the power button which will wipe all data on your RG552 and give you a fresh install
   8b. You will see a “Erasing” message on your RG552’s screen, go have lunch, this will take a while, after its done your device will reboot into Android automatically
   9b. Should your device be stuck on “Erasing” for more than 30 minutes please reboot your device and re-try (this happens sometimes)